Adjust clutch pedal
From gt4dc_wiki
(Difference between revisions)
Two OH five (Talk | contribs) (Created page with "Category:maintenance <TABLE><TR><TD> http://www.gt4dc.co.uk/website/images/clutchall.gif<BR> http://www.gt4dc.co.uk/website/images/clutchfree.gif<BR> http://www.gt4dc.co.uk/...") |
Two OH five (Talk | contribs) |
||
(2 intermediate revisions by one user not shown) | |||
Line 1: | Line 1: | ||
− | [[Category: | + | [[Category:drivetrain_maintenance]] |
<TABLE><TR><TD> | <TABLE><TR><TD> | ||
+ | </TD><TD> | ||
+ | </TD></TR></table> | ||
http://www.gt4dc.co.uk/website/images/clutchall.gif<BR> | http://www.gt4dc.co.uk/website/images/clutchall.gif<BR> | ||
http://www.gt4dc.co.uk/website/images/clutchfree.gif<BR> | http://www.gt4dc.co.uk/website/images/clutchfree.gif<BR> | ||
http://www.gt4dc.co.uk/website/images/clutchrelease.gif<BR> | http://www.gt4dc.co.uk/website/images/clutchrelease.gif<BR> | ||
− | |||
Check that pedal height is correct<br> | Check that pedal height is correct<br> | ||
Line 38: | Line 39: | ||
</ul> | </ul> | ||
If niether of these works then the clutch needs looking at | If niether of these works then the clutch needs looking at | ||
− |
Latest revision as of 14:26, 4 February 2017
Check that pedal height is correct
- LHD 144.9-154.9mm
- RHD 141.0-151.0mm
If required adjust pedal height. Loosen the locking nut and adjust the stopper bolt until the height is correct. Re-tighten locknut Check that pedal play and push rod play are correct Push the pedal until resistance is felt
- Pedal Freeplay:- 5.0-15.0mm
- Slowly push pedal until further resistance is felt
- Push Rod Freeplay 1.0-5.omm
If necessary adjust pedal and push rod freeplay
- Loosen the locknut until the play is correct
- Re-tighten locknut and re-check play
Check clutch release point
This is easiest done with two people - one clutching and one measuring!
- Apply the handbrake and start the engine
- Without using the clutch, SLOWLY AND GENTLY shift into reverse until you hear the gears contact
- Slowly press the clutch until the gears stop making a noise
- Measure the distance from this point to the full stroke end position - 25mm or more
If not:-
- Check pedal height, push rod and pedal freeplay
- Bleed the clutch
If niether of these works then the clutch needs looking at